|
||||
MODEL ZXQ-5 AUTOMATIC METALLOGRAPHIC SPECIMEN MOUNTING PRESS
Model ZXQ-5 automatic metallographic specimen mounting press is a kind of fully automatic mounting press, equipped with in-out water cooling system. It is suitable for the hot mounting (thermo-hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Technical specifications
Diameter of specimen: Ø25mm, Ø30mm, Ø40mm and Ø50mm Cooling method: water cooling Setting range of system pressure intensity: 0-2MPa (corresponding preparing pressure intensity: 0-72MPa) Temperature setting range: 90-190 ºC Automatic cooling temperature range: 40-90 ºC Heat preserving time: 10-2999s Max. power consumption: 1600W Power supply: single phase, 220V, 50Hz Dimensions: 700 × 550 × 515 mm Net weight: 110Kg
|
||||
