|
MODEL
METACUT-80
MANUAL / AUTOMATIC METALLOGRAPHIC SPECIMEN
CUTTING MACHINE
Model METACUT-80
Metallographic specimen cutting machine can be used to cut various metal and
non-metal materials so as to get specimen and observe the metallographic or
lithofacies structure. It is a kind of Manual / Automatic cutting machine and can
be switched between Manual and Automatic modes at will. Under automatic working
mode, the cutting can be finished without human operation. The machine has large
work table and long cutting length which make it possible to cut large samples.
The main shaft of cutting disc can also move upward or downward which can
prolong the using life of cutting disc greatly. The machine has cooling system
so as to clear up the heat produced during cutting and avoid to burn the
metallographic or lithofacies structure of specimen because of superheat. This
machine features easy operation and reliable safety.
It is the
necessary specimen preparing instrument for using in factories, scientific
research institutes and laboratories of colleges.
Features
-
Large touch screen and joystick control for easy operation.
-
Quick clamping vice which is convenient for specimen
clamping.
-
LED lighting system for
better observation.
-
Main shaft of cutting disc is movable upward and downward
which can prolong the using life of cutting disc greatly.
-
Two
working modes of
intermittent
cutting
(for large and hard specimen)
and continuous
cutting
(for small and soft specimen) can be selected.
-
The
machine can preset the cutting speed according to different specimens, this
will improve the cutting performance and quality of specimen.
-
Large volume
re-circulating cooling system can help to cool down the specimen during
cutting process so as to avoid burning damage to the organization.
-
The
machine can be operated in manual cutting mode or automatic cutting mode.
-
Various cutting data can be displayed on high definition
backlight type LCD screen.
-
Automatic withdraw function after cutting is finished.
Technical specifications
Max. cutting diameter: Ø
80mm
Sand wheel specification: 300 x 2 x 32 mm
Rotating speed of main shaft: 2300 rpm (or 600-2800 rpm stepless speed is
optional)
Cutting disc upward and downward moving distance: 0-50 mm
Worktable forward and backward moving distance: 0-320 mm
Automatic feeding speed: 0-180 mm/min
Working table size: 430 x 320 mm
Motor power: 2.2 KW
Power supply: AC 380V, 50Hz, three phases
Dimensions: 930 x 920 x 610 mm
Weight: 310 KG
Optional
|
